|
STAINLESS STEEL BARS
Stainless steel bar is produced in a wide variety
of sizes and shapes. All standard types are available in round bars. Some types
are also available from stock in hex, square and flat (rectangular) bar sizes.
Listed below are the standard alloys and some of the many specifications which
apply to these specific types and conditions. Note that condition "B"
refers to material which has been work hardened to produce higher tensile
strength qualities.
| TYPE |
SPECIFICATIONS |
| PH-13-8-MO |
AMS-5629, STM-05-602, CAP, ASTM-A-564 Grade XM13,
AMS-2300, DMS 2100,
STO-160LB0013 HMS-6-1105 |
| 15-5 PH |
AMS-5659, AMS-2300, CAP, ASTM-A-564 Grade XM-12 |
| 17-4 PH |
AMS-5643, AMS-2303, MBO-160-003, Exc. Sonic,
LBO-160-133, CAP,
ASTM-A-564 Grade 630 |
| 17-4 PH "H-1150" |
AMS-5643, Chems Only, ASTM-A-564 Cond H 1150 |
| 17-4 PH Prec. Grd. |
Same Specs. as Reg. 17-4. |
| 17-7 PH |
AMS-5644 |
| 302 |
ASME-SA-479, MIL-S-7720, QQS-763, ASTM-A-276,
ASTM-A-479, ASTM-A-580 |
| 302 Cond. "B" |
MIL-S-7720, AMS-5637 CHEMS ONLY, QQS-763 |
| 302 Prec. Grd. |
MIL-S-7720, QQS-763, ASTM-A-580 |
| 303 Sul |
MIL-S-7720, MIL-W-52263, AMS-5640, QQS-763,
QQS-764, ASTM-A-581/582, ASTM-A-320 |
| 303 Sul Cond. "B" |
MIL-S-7720, MIL-W-52263, QQS-764, ASTM-A-320, GR
B8F CL2, ASTM-A-581 |
| 303 Sul Prec. Grd. |
MIL-S-7720, MIL-W-52263, AMS-5640 Type 1,
QQS-763, ASTM-A-581/582, ASTM-A-320 |
| 303 Sel |
MIL-S-7720, MIL-W-52263, AMS-5640 Type 2,
AMS-5641, QQS-763, QQS-764,
ASTM-A-581/582, ASTM-A-320 |
| 303 Sel Cond. "B" |
MIL-S-7720, MIL-W-52263, ASTM-A-320, AMS-5738,
QQS-763, QQS-764, ASTM-A-581 |
| 303 Sel Prec. Grd. |
MIL-S-7720, MIL-W-52263, AMS-5640 Type 2,
AMS-5641, QQS-763, ASTM-A-581,
ASTM-A-320 |
| 304 |
QQS-763, AMS-5639, ASTM-A-276, ASTM-A-479,
ASME-SA-479, ASTM-A-193,
ASTM-A-320, ASTM-A-580 |
| 304 Cond. "B" |
QQS-763, ASTM-A-276, ASTM-A-193 GRD. B8 CL 2 |
| 304 Prec. Grd. |
QQS-763, AMS-5639, ASTM-A-193, ASTM-A-320,
ASTM-A-580 |
| 304 L |
QQS-763, AMS-5647, ASTM-A-276, DMS-2050,
ASTM-A-479, ASME-SA-479, ASTM-A-580 |
| 304 L. Vac. Melt. |
QQS-763, AMS-5647, ASTM-A-276, MBO-160-037 Exc.
Sonic & Tranv., DMS-2050 |
| 309 |
QQS-763, AMS-5650, ASTM-A-276, ASTM-A-580 |
| 310 |
QQS-763, AMS-5651, ASTM-A-276, ASTM-A-479,
ASME-SA-479, ASTM-A-580 |
| 316 |
MIL-S-7720, AMS-5648, QQS-763, ASTM-A-193,
ASTM-A-276, ASTM-A-479, ASTM-A-580, ASME-SA-479, ASTM-A-320 |
316 Cond. "B"
(03 Max C) |
MIL-S-7720A, QQS-7630, ASTM-A-276,
ASTM-A-193, GRD B8M CL2 |
| 316 L |
QQS-763, AMS-5653, ASTM-A-276, ASTM-A-479,
ASME-SA-479, ASTM-A-580 |
| 317 |
QQS-763, ASTM-A-276, ASTM-A-580 |
| 317 L |
QQS-763 |
| 321 |
QQS-763, AMS-5645, ASTM-A-276, ASTM-A-193,
ASTM-A-479, ASME-SA-479,
ASTM-A-320, ASTM-A-580 |
| 330 |
AMS 5716 |
| 347 |
QQS-763, AMS-5646, ASTM-A-276, ASTM-A-193,
ASTM-A-479, ASME-SA-479,
ASTM-A-320, ASTM-A-580 |
| AM-355 |
AMS-5743 |
| 410 |
QQS-763, AMS-5613, AMS-2303, AMS-5612,
ASTM-A-276, ASTM-A-479, ASME-SA-479, ASTM-A-580 |
| 416 |
QQS-763, QQS-764, ASM-5610, MIL-W-52263,
ASTM-A-581/582 |
| 416 Prec. Grd. |
QQS-763, AMS-5610, MIL-W-52263, ASTM-A-581 |
| 418 (Greek Ascolay) |
AMS-5616 |
| 420 |
QQS-763, AMS-5621, ASTM-A-276, ASTM-A-580 |
| 420 F |
AMS-5620 Type 2, ASTM-A-581/582 |
| 430 |
QQS-763, AMS-5627, ASTM-A-276, ASTM-A-479,
ASTM-A-580 |
| 430 F |
QQS-763, QQS-764, MIL-W-52263, ASTM-A-581/582 |
| 431 |
MIL-S-18732, QQS-763, DMS-1565, ASTM-A-276,
AMS-5628, AMS-2303, ASTM-A-580 |
| 440 A |
QQS-763, AMS-5631, ASTM-A-276, ASTM-A-580 |
| 440 C |
QQS-763, AMS-5630, ASTM-A-276, ASTM-A-580 |
| 440 C Prec. Grd. |
QQS-763, AMS05630, ASTM-A-276, ASTM-A-580 |
| 440 F Se |
QQS-764B, ASTM-A-582, AMS-5632 Type 2 |
| 446 |
QQS-763, ASTM-A-580 |
| Nitronic 40
(21-6-9) |
AMS-5656, ASTM-A-276 |
| Nitronic 50 (XM-19)
(22-13-5) |
AMS-5764A, ASME-SA-479, ASTM-A-479, ASTM-A-193GR-B8R, ASTM-A-276, ASTM-A-580 |
| Nitronic 60 |
ASTM-A-479, ASTM-A-276, ASTM-A-580 (S21800) |
| Carp. 20 |
ASTM-B-473 |
Most stainless steel bars are produced in twelve
foot random lengths (R/L). This means that the bars are from ten feet to
fourteen feet in length. If your requirement is such that you need bars of a
specific minimum length, you can specify a minimum length and we will select
the appropriate bars from stock. For example, should you require bars at least
eleven feet in length, you should specify "11 foot minimum random
length" or "11' min R/L." Listed below are the most common sizes
available and their estimated weights.
|
STAINLESS STEEL ROUND BARS |
Size
in
Inches |
Est. Wt. Lbs. |
Size in
Inches |
Est. Wt. Lbs. |
Size in
Inches |
Est. Wt. Lbs. |
Size in
Inches |
Est. Wt. Lbs. |
per
Foot |
12-ft.
Bar |
per
Foot |
12-ft.
Bar |
per
Foot |
12-ft.
Bar |
per
Ffoot |
12-ft.
Bar |
|
Ann.
& Cold Drawn |
Ann.
& Cold Finished
(cont.) |
Hot
Rolled. Ann., Rough Turned |
| 1/8 |
.0418 |
.5012 |
1-1/2 |
6.014 |
72.17 |
3-1/8 |
26.10 |
313.2 |
8-1/2 |
193.1 |
2317 |
| 5/32 |
.0653 |
.7831 |
1-9/16 |
6.526 |
78.31 |
3-1/4 |
28.23 |
338.8 |
9 |
216.5 |
2598 |
| 3/16 |
.0940 |
1.128 |
1-5/8 |
7.058 |
84.70 |
3-3/8 |
30.45 |
365.3 |
9-1/2 |
241.2 |
2895 |
| 7/32 |
.1279 |
1.535 |
1-3/4 |
8.186 |
98.23 |
3-1/2 |
32.74 |
392.9 |
10 |
267.3 |
3207 |
| 1/4 |
.1671 |
2.005 |
1-7/8 |
9.397 |
112.8 |
3-5/8 |
35.12 |
421.5 |
11 |
323.4 |
3881 |
| 5/16 |
.2610 |
3.132 |
2 |
10.69 |
128.3 |
3-3/4 |
37.59 |
451.0 |
12 |
384.9 |
4619 |
| 11/32 |
.3158 |
3.790 |
2-1/8 |
12.07 |
144.8 |
3-7/8 |
40.14 |
481.6 |
13 |
451.7 |
5421 |
| 3/8 |
.3759 |
4.510 |
2-3/16 |
12.79 |
153.5 |
4 |
42.77 |
513.2 |
14 |
523.9 |
6287 |
| 7/16 |
.5116 |
6.139 |
2-1/4 |
13.53 |
162.4 |
4-1/8 |
45.48 |
545.8 |
|
|
|
| 1/2 |
.6682 |
8.019 |
2-5/16 |
14.29 |
171.5 |
4-1/4 |
48.28 |
579.3 |
|
|
|
| 5/8 |
1.044 |
12.53 |
2-3/8 |
15.08 |
180.9 |
4-3/8 |
51.16 |
613.9 |
|
|
|
|
Ann.
& Cold Finished |
2-1/2 |
16.71 |
200.5 |
4-1/2 |
54.13 |
649.5 |
|
|
|
| 1/2 |
.6682 |
8.019 |
2-5/8 |
18.42 |
221.0 |
4-5/8 |
57.18 |
686.1 |
|
|
|
| 9/16 |
.8457 |
10.15 |
2-3/4 |
20.21 |
242.6 |
4-3/4 |
60.31 |
723.7 |
|
|
|
| 5/8 |
1.044 |
12.53 |
2-7/8 |
22.09 |
265.1 |
4-7/8 |
63.52 |
762.3 |
|
|
|
| 11/16 |
1.263 |
15.16 |
3 |
24.06 |
288.7 |
5 |
66.82 |
801.9 |
|
|
|
| 3/4 |
1.504 |
18.04 |
3-1/8 |
26.10 |
313.2 |
5-1/4 |
73.67 |
884.0 |
|
|
|
| 13/16 |
1.765 |
21.17 |
3-1/4 |
28.23 |
338.8 |
5-1/2 |
80.86 |
970.2 |
|
|
|
| 7/8 |
2.046 |
24.56 |
3-3/8 |
30.45 |
365.3 |
5-3/4 |
88.37 |
1060 |
|
|
|
| 15/16 |
2.349 |
28.19 |
3-1/2 |
32.74 |
392.9 |
6 |
96.22 |
1155 |
|
|
|
| 1 |
2.673 |
32.07 |
3-5/8 |
35.12 |
421.5 |
6-1/4 |
104.4 |
1253 |
|
|
|
| 1-1/16 |
3.017 |
36.21 |
3-3/4 |
37.59 |
451.0 |
6-1/2 |
112.9 |
1355 |
|
|
|
| 1-1/8 |
3.383 |
40.59 |
3-7/8 |
40.14 |
481.6 |
6-3/4 |
121.8 |
1461 |
|
|
|
| 1-3/16 |
3.769 |
45.23 |
4 |
42.77 |
513.2 |
7 |
131.0 |
1572 |
|
|
|
| 1-1/4 |
4.176 |
50.12 |
4-1/4 |
48.28 |
579.3 |
7-1/4 |
140.5 |
1686 |
|
|
|
| 1-5/16 |
4.604 |
55.25 |
4-1/2 |
54.13 |
649.5 |
7-1/2 |
150.4 |
1804 |
|
|
|
| 1-3/8 |
5.053 |
60.64 |
4-5/8 |
57.18 |
686.1 |
7-3/4 |
160.5 |
1926 |
|
|
|
| 1-7/16 |
5.523 |
66.28 |
4-3/4 |
60.31 |
723.7 |
8 |
171.1 |
2053 |
|
|
|
|
|
|
5 |
66.82 |
801.9 |
8-1/4 |
181.9 |
2183 |
|
|
|
Click here for a printable version of this document.
(Adobe Acrobat Reader required. Click here to download the Reader).
|
